DUAL AXIS HALF OR MICROSTEPPING DRIVER
Aim Control's dual axis stepper motor driver is the most dynamic, versatile, and cost effective on the market. With its exceptional accuracy, stability, and flexibility, is capable of satisfying the most demanding stepper motor drive requirements.
Aim Controls' Stepper Drivers feature:
1. Ultra-High stepper motor speeds with extended torque range.
2. Smooth, quiet and efficient motor operation.
3. Selectable half or 2-8 bit microstepping (51,200 steps/rev. max
4. Isolated I/O connections for encoders and up to 4 other I/O devices (e,g., limit switches)
Patented Driver Circuitry
Each motor axis is powered with AIM's patented stepper motor driver circuitry. This advanced circuitry provides quiet, smooth, and efficient motor operation, while at the same time achieving the highest operating speeds with extended torque.
Torque vs Speed
Aim Controls' Stepper Motor Drivers provide the state of the art in dynamic speed range. Noise and vibration are very substantially reduced and the stepper motors can be operated at far greater speeds than with any competing drive system. The following is a sample torque vs speed curve. One of the secrets of the Coordinate series controllers is the incredibly accurate and clean driver signals sent to the stepper motor coil. This is clearly demonstrated by the following actual motor coil waveform.
Custom Engineering
AIM works with each customer to analyze the problem(s) in a particular system and then offer a custom solution if required. AIM can also design and build custom Stepper drivers on a quantity basis.
Electrical Specifications -- +12 to 30 vdc (higher voltages available); 2 amps phase max.; half step mode or 2-8 bit microstep with a maximum of 51,200 steps/rev.; USB interface for Step and direction (contact AIM for USB communication protocol); standard Step & Direction inputs; dual encoder (A, B, & I) inputs, plus 4 I/O for limit switches.
Physical Specifications -- 4”w x 6.5"L x 2"T; approx. 1 lbs.
G5 Two Axis Stepper Motor Driver
